User`s guide

Table Of Contents

Apriva

BT200-T Smart Card Reader for Windows Mobile

Version 6.x Installation and User’s Guide

Powering on the Reader

When powered on, both LEDs illuminate while the reader performs a series of

startup tests. For LED startup descriptions, see Reader LED Startup

Indications on page 14.

To power the reader on or off:

Press the Power On/Off button on the top of the reader. If the reader will

not power on (the LEDs are not lit), try charging the battery as described

in Charging a Completely Discharged Reader Battery on page 14.

Installing the Reader Driver on the

Mobile Device

You must install the Apriva Reader driver on the mobile device before you can

pair the devices. See Pairing the Devices on page 6.

To upload the reader files to the mobile device:

1. If applicable, obtain the Apriva firmware and driver files from your system

administrator. For more information, contact Apriva Technical Support.

See Apriva Technical Support on page 17.

2. If you do not have one currently installed, download a data

synchronization program, such as Microsoft ActiveSync (for Windows

XP) or Windows Mobile Device Center (for Windows Vista or Windows

7). You can download the programs from the Microsoft website at:

http://www.microsoft.com/windowsmobile/en-us/downloads/default.mspx

3. Connect the mobile device to the computer with the USB cable. Use the

supplied adapter if necessary.

4. Power on the mobile device. The data synchronization program should

start, showing the user interface of the mobile device on the computer. If

the program does not start, make sure it is correctly installed and that the

USB cable is correctly connected.

5. Copy and paste the Apriva reader firmware and driver files from the

computer to the following directory of the mobile device: Start > File

Explorer > My Documents, as shown in Figure 2 on page 5. The Apriva

Reader file names are similar to the following:

• AprivaReader<vxx_xx_xxxx-date>.bin, where “<xx_xx_xxxx>” is the

version number.

• AprivaSmartCardDriver.<xx.xx.xx>.cab, where “<xx.xx.xx>” is the

version number.