User`s guide

Apriva

BT200-T Smart Card Reader for Intermec

CK61B/G Installation and User’s Guide

Installing the CSPware Software on

the Mobile Device

To install the CSPware software on the mobile device:

1. If you do not have one currently installed, download a data

synchronization program, such as Microsoft ActiveSync (for Windows

XP) or Windows Mobile Device Center (for Windows Vista or Windows

7). You can download the programs from the Microsoft website at:

http://www.microsoft.com/windowsmobile/en-us/downloads/default.mspx

2. Connect the mobile device to the computer through the USB cable. Use

the supplied adapter if necessary.

3. Power on the mobile device. The data synchronization program should

start, showing the user interface of the mobile device on the computer. If

the program does not start, make sure it is correctly installed and that the

USB cable is correctly connected.

4. Copy and paste the AprivaCSPwareVxx-xx-xx.cab file from the

folder on the computer to the following directory on the mobile device:

Start > Programs > File Explorer.

5. If you are using a soft-token certificate (see Adding a Soft-Token

Certificate on page 23), copy and paste the certificate file to the same

directory.

6. On the mobile device, select the AprivaCSPwareVxx-xx-xx.cab file

from the File Explorer directory. Selecting the file automatically installs

it. After the installation is complete, the mobile device restarts, and you

can view or add certificates. See the next section,

Adding and Viewing

Certificates.