Safety data sheet

Safety data sheet according to Regulation (EC) No 1907/2006, Annex II
Revision date / version: 02.03.2016 / 0001
Replacing version dated / version: 02.03.2016 / 0001
Valid from: 02.03.2016
PDF print date: 20.04.2016
PrintaFix Basic
Einsatzgebiet: 3D-Druck
If accidental entry into drainage system occurs, inform responsible authorities.
6.3 Methods and material for containment and cleaning up
Soak up with absorbent material (e.g. universal binding agent, sand, diatomaceous earth, sawdust) and dispose of according to
Section 13.
Fill the absorbed material into lockable containers.
Flush residue using copious water.
6.4 Reference to other sections
For personal protective equipment see Section 8 and for disposal instructions see Section 13.
SECTION 7: Handling and storage
In addition to information given in this section, relevant information can also be found in section 8 and 6.1.
7.1 Precautions for safe handling
7.1.1 General recommendations
Ensure good ventilation.
Avoid inhalation of the vapours.
Keep away from sources of ignition - Do not smoke.
Take measures against electrostatic charging, if appropriate.
Avoid contact with eyes or skin.
Eating, drinking, smoking, as well as food-storage, is prohibited in work-room.
Observe directions on label and instructions for use.
Use working methods according to operating instructions.
7.1.2 Notes on general hygiene measures at the workplace
General hygiene measures for the handling of chemicals are applicable.
Wash hands before breaks and at end of work.
Keep away from food, drink and animal feedingstuffs.
Remove contaminated clothing and protective equipment before entering areas in which food is consumed.
7.2 Conditions for safe storage, including any incompatibilities
Keep out of access to unauthorised individuals.
Store product closed and only in original packing.
Not to be stored in gangways or stair wells.
Observe special storage conditions.
Do not store with flammable or self-igniting materials.
Protect from direct sunlight and warming.
Store in a well-ventilated place.
Store cool.
7.3 Specific end use(s)
No information available at present.
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Chemical Name
Ethanol
Content %:85-
95
WEL-TWA: 1000 ppm (1920 mg/m3) WEL-STEL: --- ---
Monitoring procedures: - Compur - KITA-104 SA (549 210)
- Draeger - Alcohol 25/a Ethanol (81 01 631)
-
DFG (D) (Loesungsmittelgemische), Methode Nr. 6 DFG (E) (Solvent mixtures) -
1998, 2002 - EU project BC/CEN/ENTR/000/2002-16 card 63-2 (2004)
- Draeger - Alcohol 25/a (81 01 631)
- Draeger - Alcohol 100/a (CH 29 701)
BMGV: --- Other information: ---
Chemical Name
Propan-2-ol
Content %:1-5
WEL-TWA: 400 ppm (999 mg/m3) WEL-STEL: 500 ppm (1250 mg/m3) ---
Monitoring procedures: - Compur - KITA-122 SA(C) (549 277)
- Compur - KITA-150 U (550 382)
Page 4 of 15