Technical data

Aprilia Consumer Service Spa
Technical Service and Training
Release 4 july 99
This material is didactic and
may be changed following the technical
development of the product
SECTION 7
BRAKING SYSTEM
The brakins systems of RSVmille are the best you can have on a production bike.
Aprilia has developed them together with Brembo, company leader in this sector, and this braking systems
offers an excellent MODULARITA’ through a 4 position adjusting lever. The braking pads are studied for
informing the rider when the thickness of the braking element is lower than 1 mm.
FRONT BRAKE
DISK: Steel
Thickness: 5 mm
Ex. diameter: 320 mm
Calipers: 4 opposite pistons
Br. pistons diam.: 2x 30 mm - 2x 34 mm
Braking pads: i/d 450FF - TOSHIBA TT 2802 (synterized)
Br. pads surface: 23,68 cm²
Br. pump diam.: 16 mm
REAR BRAKE
DISK: Steel
Thickness: 5 mm
Ex. diameter: 220 mm
Calipers: 2 opposite pistons
Br. pistons diam.: 2x 32 mm
Braking pads: i/d 450FF - TOSHIBA TT 2802
Br. pads surface: 16,17 cm²
Br. pump diam.: 11 mm