Submittal
Dealer: _________________________________________
Engineer: _______________________________________
Location: _______________________________________
Date: __________________________________________
Project: _________________________________________
Architect: _______________________________________
Contractor: ______________________________________
Suppliers: ________________________________________
Ventilating Dehumidifier
Models E100V + 8190FF | Submittal Sheet
P.O. Box 1467
Madison, WI 53701-1467
800.334.6011 F: 608.257.4357
AprilairePartners.com
Form No. Sub-E100V+8190FF • 305452 02.20
©2021 Aprilaire – Division of Research Products Corporation
COMPONENTS
• Model E100V - Dehumidifier (requires 8190FF)
• Model 8190FF
- Ventilation Plenum for Aprilaire Dehumidifiers
GENERAL DESCRIPTION
The Aprilaire Ventilating Dehumidifier brings in fresh air to meet ventilation needs while
removing the high humidity that comes in with the outdoor air. Fresh air is brought in
when the air conditioning is running to allow the cooling equipment to remove humidity
from the air. If ventilation needs cannot be met when the air conditioning is running
the Aprilaire Ventilating Dehumidifier brings in fresh air and removes the humidity with
the integral dehumidification system. The desired amount of ventilation and the
maximum allowable humidity level is set using the built-in control which then measures
the humidity of the air to determine if dehumidification is needed. Energy savings, while
meeting the ventilation need, is optimized by using high and low temperature limits to
bring in outdoor air when temperatures are more moderate.
The provided 8' power cord with plug allows for simple installation, requiring a single
120VAC outlet to operate the dehumidifier and integrated 24 volt ventilation damper.
Installation temperature range up to 140°F. The integrated digital display and control
allows the %RH and the ventilation time setting to be adjusted. The unit is provided
with removable, washable filter.
When properly installed it will meet the following mechanical ventilation
requirements:
• ASHRAE 62.2
• Energy Star Certified Homes
• EPA Indoor airPLUS
• International Residential Code (IRC)
The submittal is intended to show general, overall product dimensions
and provide guidance for installation clearance. Drawings are not to scale.
Ensure submittals are current. Research Products reserves the rights to
make product change without notifications or obligations.
SPECIFICATIONS
Nominal ventilation
airflow (CFM)
150 CFM
Capacity
(1)
(water removal) 100 ppd
Energy factor
(1)
(eciency) 2.6 L/kWh (5.5 pints/kWh)
Voltage, phase, frequency 120VAC, 1 Phase, 60Hz
Current draw
(1)
6.9 Amps
Airflow @ varying E.S.P.
(external static pressure - dry coil)
0.0" w.c.
0.2" w.c.
0.4" w.c.
280 CFM
245 CFM
210 CFM
Noise-Fan Only 52.8 dBA ducted
Noise-Compressor and Fan 55.0 dBA ducted
Dimensions:
(combined cabinets)
(2)
Width: 14½
Height: 23½" w/o adjustable feet
Length: 48¼"
Weight
-E100V Unit Weight:
-E100V Shipping Weight:
-8190FF Unit Weight:
-8190FF Shipping Weight:
64 lbs.
82 lbs.
13.7 lbs.
16.8 lbs
Control Built-in digital control with display
Filter Washable MERV 8
Refrigerant R410A
Coil type Corrosion-resistant aluminum
8' Power cord Plug type
Drain connection
3/4" nominal drain tubing; Supplemental
barb fitting for 3/4" clear drain tubing
Cabinet insulation 1/2" EPS
Air discharge Top
Inlet/Outlet duct collars 10" round
Backdraft damper at outlet Included
Warranty 5 Years
(1)
Rated capacity, energy factor and current draw measured at 80°F/60% RH inlet air at 0.0 ESP.
(2)
Height does not include adjustable feet. Length includes the duct collars, and width includes the
filter doors.
90-2065
14½"
23½"
48¼"
15¾"