Installation Guide

6 English

SPECIFICATIONS

Model E080 Model E100

Unit Weight 63 lbs. 64 lbs.

Capacity

80°F, 60% RH Conditions

80 pints per day @ 185 CFM 100 pints per day @ 280 CFM

Power

115 VAC, Single Phase, 60 Hz

5.1A operating current 6.9A operating current

Dehumidifier Inlet Air Conditions

Dehumidification: 50°F–104°F, 40°F dew point minimum

Ventilation: 40°F–140°F, 0% RH–99% RH (non-condensing)

Filter MERV 8, washable

Airflow

External Static

Pressure ("WC)

Airflow (CFM)

External Static

Pressure ("WC)

Airflow (CFM)

0.0 185 0.0 280

0.2 135 0.2 245

0.4 85 0.4 210

0.6 175

OTE: N Rated capacity and current draw measured

at 80°F/60% RH inlet conditions at 0.0 external static

pressure.

PREPARING THE UNIT FOR

INSTALLATION

IMPORTANT: Cut the strap securing the compressor

shipping support bracket and remove the strap and

shipping bracket.

See Figure 8

1. Clip off and remove the plastic straps securing the

compressor to the shipping bracket.

2. Remove the two screws securing the shipping

bracket to the housing. Remove and discard the

shipping bracket, and reinstall the two screws in the

dehumidifier.

90-1908

Figure 8: Preparing the Unit for Installation

1 - Clip Off Plastic Strap 2 - Remove Shipping

Bracket