Install Instructions

SPECIFICATIONS

MODEL E080 MODEL E100

Unit Weight 63 lbs� 64 lbs�

Shipping Weight 81 lbs� 82 lbs�

Capacity

80°F, 60% RH Conditions

80 pints per day @ 185 CFM 100 pints per day @ 280 CFM

Power

115 VAC, Single Phase, 60Hz

5�1A operating current 6�9A operating current

Dehumidifier Inlet Air Conditions

Dehumidification: 50°F – 104°F, 40°F dew point minimum

Ventilation: 40°F – 140°F, 0%RH – 99%RH (non-condensing)

Filter MERV 8, washable

Airflow

External Static Pressure ("w.c.) Airflow (CFM) External Static Pressure ("w.c.) Airflow (CFM)

0�0 185 0�0 280

0�2 135 0�2 245

0�4* 85 0�4 210

0�6* 175

NOTE: Rated capacity and current draw measured at 80°F/60% RH inlet conditions at 0.0 external static pressure.

*Maximum design external static pressure.

SET UP DEHUMIDIFIER FOR INSTALLATION

IMPORTANT: Cut the strap securing the compressor

shipping support bracket and remove the strap and shipping bracket�

SeeFIGURE1�

CLIP OFF

PLASTIC STRAP

REMOVE SHIPPING BRACKET

90-1908

FIGURE 1 – REMOVE SHIPPING BRACKET