Installation Manual

INTRODUCTION AND COMPLIANCE STATEMENT
The Model 8192A Ventilator with Dehumidification is designed to bring outdoor air into today’s efficiently designed homes while removing
moisture from the air. Simply duct the inlet of the ventilator to an outdoor air intake and duct the discharge to the return side of the HVAC system.
Plug the unit in, set the amount of needed ventilation and set the humidity limit.
High temperature limits can be set on the control to prevent bringing in outdoor air during the hottest period of the day. The built in control will
automatically compensate for the ventilation time that is missed by bringing in additional outdoor air during cooler periods of the day. Compliance
with the requirements of ASHRAE 62.2-2010 is met as the control adds ventilation time as needed to account for the fractional on-time and
effectiveness of the ventilation schedule. The control will also ensure that ventilation occurs no less than one hour of every four. When properly
installed and set, the Model 8192A Ventilator with Dehumidification will meet the mechanical ventilation requirements of:
Energy Star Certified Homes, Version 3
EPA Indoor airPLUS, Version 1
2012 International Residential Code (IRC)
2012 International Energy Conservation Code (IECC)
SPECIFICATIONS
Model 8192A
Unit Weight
64 lbs.
Shipping Weight
82 lbs.
Moisture Removal Capacity
100 pints per day @ 280 CFM
80°F, 60%RH Conditions
Power
115 VAC, Single Phase, 60Hz
6.9A operating current @ 80°F, 60%RH
Inlet Air Conditions
Ventilation: 40°F – 140°F, 0%RH – 99%RH (non-condensing)
Dehumidification: 50°F – 104°F, 40°F dew point minimum
Filter
MERV 8, washable
Airflow External Static Pressure (“w.c.) Airflow (CFM)
0.0 280
0.2 245
0.4 210
0.6* 175
*Maximum design external static pressure.
NOTE: Rated capacity and current draw measured at 80°F/60% RH inlet conditions at 0.0 external static pressure.
English 3