Submittal Sheet

The submittal is intended to show general, overall product dimensions and provide guidance for installation clearance. Drawings are not to
scale. Ensure submittals are current. Research Products reserves the rights to make product change without notifications or obligations.
Aprilaire, Division of Research Products Corporation
|
PO Box 1467
|
Madison, WI 53701
|
Phone: [phone]
Project: ______________________________________________
Architect: ____________________________________________
Contractor: ___________________________________________
Suppliers: ____________________________________________
Dealer: ______________________________________________
Engineer: _____________________________________________
Location: _____________________________________________
Date: ________________________________________________
SUBMITTAL SHEET
VENTILATOR WITH DEHUMIDIFICATION
MODEL 8191
33.00
25.00 4.004.00
10.00
10.00
12.50
15.08
14.50
1.38 to 2.00
3/4” PIPE, INSIDE
266521D Form # Sub-8191
GENERAL DESCRIPTION
The Model 8191 Ventilator with Dehumidification brings in fresh air to
meet ventilation needs while removing the high humidity that comes in
with the outdoor air. Fresh air is brought in when the air conditioning is
running to allow the cooling equipment to remove humidity from the air. If
ventilation needs cannot be met when the air conditioning is running the
Model 8191 brings in fresh air and removes the humidity with the integral
dehumidification system. The desired amount of ventilation and the
maximum allowable humidity level is set using the built-in control which then
measures the humidity of the air to determine if dehumidification is needed.
Energy savings, while meeting the ventilation need, is optimized by using
high and low temperature limits to bring in outdoor air when temperatures
are more moderate.
The provided 8’ power cord with plug allows for a simple installation,
requiring a 120VAC outlet and 24 volt wiring to HVAC system. Installation
temperature range up to 140°F. The integrated digital display and control
allows the %RH and the ventilation time setting to be adjusted. The unit is
provided with removable, washable filter.
When properly installed it will meet the following mechanical ventilation
requirements:
• Complies with ASHRAE 62.2-2010
• Energy Star Certified Homes, Version 3
• EPA Indoor airPLUS, Version 1
• 2012 & 2015 International Residential Code (IRC)
• 2012 & 2015 International Energy Conservation Code (IECC)
VENTILATION AIRFLOW
160 CFM @ 0.0”w.c.; 70 CFM @ 0.4”w.c.
CFM/WATT
3.5
MOISTURE REMOVAL
CAPACITY
70 pints/day at 80°F/60% RH inlet and 0.0”w.c. ESP
SUPPLY VOLTAGE
120 VAC; 60Hz
CURRENT DRAW
6.3 Amps in accordance with AHAM DH-1 2008 80°F,
60% RH conditions
SOUND LEVEL
47 dBA ducted; 51 dbA not ducted
UNIT DIMENSION
14-1/2 " H (cabinet) x 12-1/2 " W
25" L without collar, 33" L with collar
UNIT WEIGHT
67 lbs
FILTER EFFICIENCY
Washable MERV 8"
DUCT CONNECTION
10" round
DRAIN CONNECTION
3/4" nominal drain tubing
Supplemental barb fitting for 1/2" clear drain tubing
CONTROL
Built in digital control with display
CONTROL MOUNTING
Field interchangeable from top to front
CABINET INSULATION
1/2" EPS
AIR DISCHARGE
Interchangeable from end to top
BACKDRAFT DAMPER
Included in outlet duct collar
REFRIGERATION
R-410A
EVAPORATOR COIL
Corrosion resistant aluminum coil
POWER CORD
8' power cord with plug