Install Instructions

WI-FI SETUP

The 6000 Series Zone Control System can be connected to a Wi-Fi network with the Aprilaire App, on the 6000 Series Control, or with another Wi-Fi

device with a web browser.

STEP 1: Verify the 6000 Series Control is in Wi-Fi Connection Mode.

The 6000 Series Control by default will be in Wi-Fi Connection Mode. To confirm that the 6000 Series Control is in Wi-Fi Connection Mode, verify that

the radio bars on 6000 Series Control are strobing as shown below.

Note: If the 6000 Series Control is not in Wi-Fi

Connection Mode, refer to the online owner’s manuals

found at my.aprilaire.com.

CONNECT TO A NETWORK USING THE 6000 SERIES CONTROL

STEP 2: Navigate to the Connect without App screen:

Menu > Wi-Fi Settings > Advanced > Connect without App.

STEP : Select a network from the list of scanned networks.

STEP 4: Enter a password and press Done.

STEP 5: Press Done on the Credentials screen to connect.

CONNECT TO A NETWORK USING A BROWSER

STEP 2: Connect to the 6000 Series Control using a computer or mobile

device.

On your computer or mobile device, scan for available networks. The

6000 Series Control should appear as APRILAIRE6000 followed by a

unique identifier, corresponding to the last 6 digits of the MAC address.

Connect to the 6000 Series Control you want to configure. If you are

installing multiple systems, the MAC address of each system will be

displayed on the Wi-Fi Settings screen, and can be found on the back of

the 6000 Series Control.

STEP 3: Configure the 6000 Series Control to connect to the Wi-Fi

network.

Open a web browser on your computer or mobile device. In the browser

enter:

http://192.168.1.99/index.html

In the web browser interface select the network you want to connect

the 6000 Series Control to, and enter the network’s security credentials.

STEP 4: Verify the 6000 Series Control is connected to the Wi-Fi

network.

Once all the required information is entered in the web browser

interface, the 6000 Series Control will connect to the Wi-Fi network

you selected. After the 6000 Series Control is connected to the Wi-Fi

network, the 6000 Series Control will display the radio bars based on

the Wi-Fi signal strength.

FOR APRILAIRE APP CONNECTED CONTROLS

For detailed instructions for connecting the Control to a Wi-Fi network and registering it to an Aprilaire account, refer to the WI-Fi Quick Start

Guide included in the box.

FOR HOME AUTOMATION CONNECTED CONTROLS