User Guide

ZONE/SENSOR OPERATION
ZONE CONTROL
Additional zones can be controlled and
scheduled similar to the primary zone by
touching Zone.
1. For example, to select Zone 2, press
the Zone once. Note: The control will
revert to Zone 1 if no changes are
made for 40 seconds.
SENSOR CONTROL
The 6000 Series sensor displays room
temperature, heating/cooling or idle
status and current set point. Only the set
point can be adjusted from this sensor.
All other zone functions can be accessed
through the control.
1. Touch or to adjust the
temperature setpoint.
14
1
1