Install Instructions

SPECIFICATIONS
Model 1870 & 1870W
Weight 113 lbs�
Capacity (80°F, 60% RH Conditions) 130 pints per day @ 310 CFM
Power (115 VAC, Single Phase, 60Hz) 8�3 Amps operating current
Dehumidifier Inlet Air Conditions
Dehumidification: 50°F – 104°F, 40°F dew point minimum
Ventilation: 40°F – 140°F, 0% RH – 99% RH (non-condensing)
Filter MERV 8, washable
Airflow
External Static Pressure ("w.c.) Airflow (CFM)
0�0 310
0�2 270
0�4 225
0�6 175
0.6" w.c. is maximum design external static pressure.
The dehumidifier is not designed to prevent window condensation in winter� Indoor humidity levels must typically get lower than what dehumidifiers
can achieve to address window condensation� Use ventilation to lower indoor humidity levels in winter�
SET UP DEHUMIDIFIER FOR INSTALLATION
IMPORTANT Cut the strap securing the compressor shipping
support bracket and remove the strap and shipping bracket�
SeeFIGURE1�
CLIP OFF
PLASTIC
STRAP
REMOVE SCREWS (2)
DISCARD SHIPPING BRACKET
REINSTALL SCREWS (2)
90-2013
FIGURE 1 – REMOVE SHIPPING BRACKET
English 3