Install Instructions

90-1854
Press and hold the ON/OFF button
and MODE buttons for 3 seconds.
The measured humidity, AIR
SAMPLING and TEST will show on
the display.
90-1854
After three (3) minutes the
dehumidifier compressor will
turn on and DEHUMIDIFYING will
replace AIR SAMPLING on the
control screen.
90-1854
90-1854
After one minute of compressor
operation, all outputs will turn off
and DONE will blink for 3 seconds
and then return to the OFF screen.
SYSTEM CHECK
SYSTEM SET-UP, CHECK & START-UP (CONTINUED)
VENTILATION / AIR CYCLING
90-1854
If not using the dehumidifier to
periodically cycle air in the crawl
space, press MODE to go to ZONE
screen selections.
90-1854
If using the dehumidifier for air
cycling, Enable and press MODE.
90-1854
Press MODE at the VENT TIMED
screen to go to ventilation time
selection screen.
90-1854
Press the UP or DOWN arrows
to adjust the ventilation time
per hour from 0 to 60 minutes.
After selecting time, press
MODE. Press MODE through the
ZONE, EXTERNAL, DEH w/AC,
and RH offset screens. DONE
will be displayed on the screen
and Installer Set-up is complete.
Proceed to SYSTEM CHECK. on
page 7.
7