Install Instructions

CLIP OFF

PLASTIC

STRAP

REMOVE SHIPPING BRACKET

FIGURE 1 – Remove Shipping Bracket

90-2302

IMPORTANT: Cut the strap securing the compressor

shipping support bracket and remove the strap and shipping bracket.

See Figure 1.

SET UP DEHUMIDIFIER FOR INSTALLATION

SPECIFICATIONS

Model 1820

Weight

56 lbs.

Capacity: AHAM DH-1-2008 80°F, 60% RH Conditions 70 pints per day @ 200 CFM

Power: 115 VAC, Single Phase, 60Hz 5.8 Amps operating current

Dehumidifier Inlet Air Conditions

Dehumidification: 50°F – 104°F, 40°F dew point minimum

Ventilation: 40°F – 140°F, 0%RH – 99%RH (non-condensing)

Filter

MERV 8, washable

Airflow

200 CFM

1. Dehumidifier

2. Inlet/Outlet Collars

3. Literature

a. Installation Instructions

b. Owner’s Manual

4. Parts Bag

a. #10 x 1/2 Screws (9)

b. Threaded Barbed Fitting for Drain

Connections

c. Torx Bit

5. 10 foot, 3/4” Drain Tube

PACKAGING CONTENT

Use the screws in the parts bag to attach the duct

collars to the inlet and outlet of the dehumidifier.

See Figure 2.

OUTLET

DUCT

COLLAR

INLET

DUCT

COLLAR

FIGURE 2 – Install Duct Collars

90-2308

DUCT COLLARS