Technical information

3/6 LS PRO OWNER'S HANDBOOK
Using the BIOS Setup utility
Chapter 3
3. If BIOS Setup cannot detect the drive type, you must
manually enter the drive’s number of cylinders, heads
and sectors, and its capacity, in the text boxes provided.
4. Choose the Save button.
The Disk 2 entries in the BIOS Setup and User-defined Hard
Disk dialogs are provided for future development; they are
greyed-out in the current version.
Floppy Disk
The information box shows the type and capacity of the
computer’s diskette drive. Beneath it are two option buttons:
Option Description
None Select this if your computer does not have a
diskette drive. This prevents the BIOS looking
for a system diskette, and so speeds up the
boot sequence.
3.5" 1.44M Select this if your computer has a 1.44 Mbyte
diskette drive.
Memory
These information boxes show the total amount of system
memory (motherboard memory plus any additional memory
modules, minus the 384 Kbyte upper memory area) and the
amount of extended memory (total memory minus the 640
Kbytes of conventional memory).