Technical information

LS PRO OWNER'S HANDBOOK 2/11
Getting Started
Chapter 2
Inserting a diskette
A diskette is inserted into the diskette drive slot shutter-
foremost, and with its label side facing up (see diagram). To
help you check the diskette is the right way round, there’s
usually a small arrow on the face of the diskette which must
point towards the drive when you insert it.
Push the diskette all the way in until it engages with the drive
mechanism. When the drive's eject button pops out, the
diskette is fully engaged.
Removing a diskette
Before attempting to remove a diskette, make sure that the
drive is not currently in use (the diskette activity indicator on
the computer’s front bezel must be unlit).
Press the eject button on the drive. The drive mechanism
disengages and the diskette is ejected half-way out of the drive.
If a diskette becomes stuck in the drive, perhaps because its
label has peeled back, do not attempt to remove it with
tweezers or any similar implement; you risk damaging the drive.
Call an authorized maintainer.