Technical information

LS PRO OWNER'S HANDBOOK 1/7
Introducing
Chapter 1
1 security loop: you can put a padlock through this
loop to secure the top cover.
2 handle: to remove the top cover, remove the retaining
screws at each side, then grasp and pull this handle firmly.
3 PCMCIA slots: suitable for all types of Personal
Computer Memory Card International Association
(PCMCIA) PC Card devices.
4 AC power outlet: where the monitor power cord
can plug in.
5 voltage selection switch: the system unit can be
set to operate with a 100-120 volt or 220-240 volt
AC power supply.
6 AC power inlet: where the system unit power cord
plugs in.
7 dual-channel serial port (50 baud to 19,200 baud):
typically used for connecting an external modem or
a serial printer signal cable.
8 parallel port: typically used for a printer signal cable.
9 monitor port: connect the monitor signal cable to
this port.
10 TPE Ethernet port: connect a cable with an RJ-45
connector to this port, to link the computer into a
twisted-pair Ethernet (10Base-T) network.
11 AUI Ethernet port (optional): connect an
attachment unit interface transceiver “drop” cable to
this port, to link the computer into a thick-Ethernet
(10Base-5) network.
12 BNC Ethernet port: connect a BNC T-connector
to this port, to link the computer into a thin-Ethernet
(10Base-2) network.
13 mouse port: connect the mouse to this port.
14 keyboard port: connect the keyboard to this port.