Technical information

LS PRO OWNER'S HANDBOOK C/1
Quick Guide to Security
Appendix C
C QUICK GUIDE TO SECURITY
This computer is protected by an on-board security system.
A user account has been set up so that you can use the
computer, but you may be restricted to using it only at certain
times or on certain days of the week - these are your logon
periods.
The person responsible for the security system is called the
Master user. This may be the owner of the computer, or
someone else who has been given the job of safeguarding its
security. If you have any problems with the security system,
ask the Master user for help.
Logging-on to the computer
Every time you turn on or restart the computer (for example,
by pressing CTRL+ALT+DEL in MS-DOS) you can expect to go
through a logon sequence. This typically involves an infrared
device called a KeyLOC card, a user name and a password.
1. If the Logon dialog box appears, aim your KeyLOC
card at the infrared sensor on the front of the
computer and press the button on the card. If you
don’t have a KeyLOC card, press the ESC key instead.
2. If the User Logon dialog box appears, type your user
name in the User Name box, press TAB, then type your
password in the Password box. The password is not
displayed as you type (each character is shown as an
asterisk). Choose the OK button (if you press ENTER
after typing your password, the OK button is chosen
automatically).
You may get both dialog boxes, or only one. It depends on
how the Master user has set up the security system.