Technical information

LS PRO OWNER'S HANDBOOK A/3
Inside the System Unit
Appendix A
10101
IEEE
802.3
PCMCIA
1
2
SECURING SCREWS
Refitting the cover is the reverse of removal. Take effective
anti-static precautions while the top cover is off.
Changing jumper settings
CLEAR
CMOS
PL19/20
SPEED SELECTION JUMPER
PL18
ETHERNET SELECTION
JUMPER
NORMAL
POSITION
PL6
CMOS JUMPER
25
MHz
33
MHz
40
MHz
20
MHz
OTHER
SX
PL25
PROCESSOR JUMPER
THICK
THIN
There are four jumpers on the motherboard that you may need
to alter:
• Clear CMOS jumper
• Ethernet selection jumper
• Processor selection jumper
• Speed selection jumper
Caution
Do not alter any other jumpers or switch settings. You may damage
the system processor, the motherboard, or both. See the label on
the inside of the system unit cover for up-to-date information.