Technical information

LS PRO OWNER'S HANDBOOK 9/15
Upgrading
Chapter 9
11. Replace the system unit cover.
Adding both drives at once
You may decide to upgrade a diskless system by adding a
diskette drive and a hard disk drive at the same time. In this
case you will need both upgrade kits.
The upgrade procedure is a combination of the procedures
for diskette and hard disk drive separately (described above).
In outline:
1. Turn off the computer and unplug all power cords.
2. Take suitable anti-static precautions and remove the
system unit cover.
3. Uncover the diskette drive aperture.
4. Secure both drives to the mounting bracket.
5. Connect the hard disk drive’s power and signal cables
to the drive.