Technical information

LS PRO OWNER'S HANDBOOK 9/13
Upgrading
Chapter 9
Adding a hard disk drive
You can add a hard disk drive to a currently diskette-only
system. The upgrade kit includes the drive itself, fixing screws
and the drive signal cable.
To fit the hard disk drive:
1. Turn off the computer and unplug all power cords.
2. Take suitable anti-static precautions and remove the
system unit cover.
If you are unfamiliar with anti-static precautions or
the procedure for removing the system unit cover,
see Appendix A, “Inside the System Unit”.
3. Unplug the diskette drive signal and power cables from
the rear of the drive. (You may find it helpful to
disconnect the signal cable from the motherboard too.)
4. Remove the screw that secures the mounting bracket
to the base of the system unit.
Coax the mounting bracket and attached diskette
drive out of the system unit.