Quick Start Guide
EZ Writer II Quick Start Guide Package Contents EZ Writer II with integrated USB cable Auxiliary USB Y-cable (for additional power if needed) Software CD: • BurnAware CD/DVD Burning Software • VLC Media Player Parts Names & Functions Your EZ Writer may differ slightly from the figure shown, however the controls will operate as described below. Front Panel of the Drive: 1. Disc Ready/Read LED: This LED is used to indicate the disc access status. 2. Eject Button: Press this button to open the disc tray.
Connecting the EZ Writer II With its integrated USB cable, the EZ Writer II simply connects to your computer’s USB port. No AC Adapter is required. Connecting the EZ Writer II using the Auxiliary USB Y-cable In the rare case that your EZ Writer requires additional power you will need to use the included Auxiliary USB Y-cable 1. Connect the EZ Writer integrated USB cable to the female end of the USB Y-cable 2. Connect the USB Y-cable to two USB ports on your computer 3.
Installing the Software CD EZ Writer II comes with two software downloads: BurnAware CD/DVD Burning Software • • VLC Media Player Please note that the included software is compatible with PC only. The included software is not necessary with Mac systems. The EZ Writer hardware is compatible with all Mac DVD/CD authoring software and media playing software 1. To install these programs, place the included software CD into your EZ Writer. 2. A software launch window will popup.
