manual

1 2
3
5 6
7
9 0
8
4
1 2
3
5 6
7
9 0
8
4
Apricorn Aegis Secure Key
Apricorn Aegis Secure Key
Quick Start Guide
Quick Start Guide
Thank you for purchasing the Apricorn Aegis Secure Key. The Aegis
Secure Key works by simply entering your desired 7-15 digit PIN directly onto
the onboard keypad. The Aegis Secure Key can then be connected to any
USB port on any computer. Should the drive be lost or stolen, the user can
rest assured that all data held on the Aegis Secure Key is safe and cannot
be accessed by any unauthorized third party
The full manual is located on the Aegis Secure Key. We recommend that you
unlock the Key and download the manual first before making any changes.
The manual can also be found at http://www.apricorn.com/, then select
Aegis Secure key.
Thank you for purchasing the Apricorn Aegis Secure Key. The Aegis
Secure Key works by simply entering your desired 7-15 digit PIN directly onto
the onboard keypad. The Aegis Secure Key can then be connected to any
USB port on any computer. Should the drive be lost or stolen, the user can
rest assured that all data held on the Aegis Secure Key is safe and cannot
be accessed by any unauthorized third party
The full manual is located on the Aegis Secure Key. We recommend that you
unlock the Key and download the manual first before making any changes.
The manual can also be found at http://www.apricorn.com/, then select
Aegis Secure key.
Introduction
Introduction
Unlocking the Key
Unlocking the Key
Changing your PIN code
Changing your PIN code
1. Press the Key button
2. Within 10 seconds enter the User PIN
(Factory default PIN: 1-1-2-2-3-3-4-4)
3. Press the Key button will blink for a correct PIN entry
will blink for an incorrect PIN entry
4. Connect the Aegis Secure Key to a
USB port within 30 seconds will be on
will blink together
will be on or blink for activity
5. To lock the Aegis Secure Key, Unplug
it form the USB port.
1. Press the Key button
2. Within 10 seconds enter the User PIN
(Factory default PIN: 1-1-2-2-3-3-4-4)
3. Press the Key button will blink for a correct PIN entry
will blink for an incorrect PIN entry
4. Connect the Aegis Secure Key to a
USB port within 30 seconds will be on
will blink together
will be on or blink for activity
5. To lock the Aegis Secure Key, Unplug
it form the USB port.
1. Press the Key button
2. Within 10 seconds enter the User PIN
(Factory default PIN: 1-1-2-2-3-3-4-4)
3. Press and hold the Key button
for 3 seconds
4. Enter a new PIN number
(The number must be 7 - 15 digits)
5.
to store the new PIN
6. Re-enter the new PIN number
7. Press the Key button
to confirm the new PIN
will blink together
will be on
Press the Key button
1. Press the Key button
2. Within 10 seconds enter the User PIN
(Factory default PIN: 1-1-2-2-3-3-4-4)
3. Press and hold the Key button
for 3 seconds
4. Enter a new PIN number
(The number must be 7 - 15 digits)
5.
to store the new PIN
6. Re-enter the new PIN number
7. Press the Key button
to confirm the new PIN
will blink together
will be on
Press the Key button
will blink together
will blink together
will blink if the new PIN is accepted and
The Key is unlocked & ready to use
Will blink alternately if the new
PIN was not accepted
will blink if the new PIN is accepted and
The Key is unlocked & ready to use
Will blink alternately if the new
PIN was not accepted
Even though the Aegis Secure Key can be used straight out of the box with the
default PIN 1-1-2-2-3-3-4-4, we highly recommend that a new User PIN is
configured immediately by following instructions below, for security reasons.
Even though the Aegis Secure Key can be used straight out of the box with the
default PIN 1-1-2-2-3-3-4-4, we highly recommend that a new User PIN is
configured immediately by following instructions below, for security reasons.