User`s manual

Performing a Complete Reset

NOTE: A complete reset will erase encryption keys and PINs and leave the Secure Key in an

unformatted condition.

There may be circumstances (forgotten PIN, redeployment, return to factory default settings)

when you need to completely reset the key. The complete reset feature will perform a

crypto-erase on the key, generate a new encryption key, delete all users, and return all of the

settings to factory default.

To perform a complete reset of the key, perform the following:

1. Press and hold UNLOCK + LOCK + 2 together for ten seconds.

The RED and BLUE LEDs will blink alternately.

2. The GREEN LED LED will glow solidly for three seconds, followed by the GREEN and

BLUE LEDs glowing solidly when complete.

3. A new Admin PIN will need to be entered and the key will need to be reformatted.