User`s manual

10
Setting the Unattended Auto-Lock Feature
To protect against unauthorized access if the key is unlocked and unattended, the Aegis
Secure Key can be set to automatically lock after a predetermined period of inactivity. In
its default state, the Aegis Secure Key’s Unattended Auto-Lock feature is turned off.
The Unattended Auto-Lock can be set to activate after 5, 10 or 20 minutes of inactivity.
To set the Unattended Auto-Lock, perform the following steps:
1. Enter the Admin mode. (Hold UNLOCK + 0 for ve seconds – with RED LED blinking,
enter the Admin PIN and press the UNLOCK button.)
The BLUE LED will glow solidly.
2. Once in the Admin mode, press UNLOCK + 6.
The RED and BLUE LEDs will blink alternately.
3. Press one of the numbers below that corresponds to the amount of inactivity you
would like the key to lock itself:
0 = OFF (The Default is OFF for this feature.)
1 = 5 minutes
2 = 10 minutes
3 = 20 minutes
4. After you have entered the desired amount of allowable inactivity, the GREEN LED
will blink three times indicating command acceptance, and then will return to the
Admin mode, indicated by the BLUE LED glowing solidly.