Owner's manual

www.apricorn.com
19
Diagnostic Mode
The keypad has a manual diagnostic mode built in to verify proper keypad
function. This mode will not allow access to any data or admin function. It
can only be used to identify the rmware level and to test button recognition.
The diagnostic mode is also useful for troubleshooting key issues.
To enter the diagnostic function:
1. Turn the Power switch on the back of the drive to the ON position.
During Power up hold 0 key until the Power-On-Self-Test (POST)
completes.
2. The LED will ash BLUE for the major and minor revisions and RED LED
to indicate (.) When complete, the LED will return to a solid RED LED
(Example: Four BLUE ashes followed by one RED ash followed
by one BLUE ash followed by one RED ash would indicate
version 4.1.)
3. Key presses after the revision will coincide with the number pressed
using the BLUE LED.
4. Example 1 = 1 ash, 2 = 2 ashes, 3 = 3 ashes….
5. Unlock = 11 ashes, Cancel = 12 ashes.
6. To Exit the Diagnostic Mode, a power re-set is required. Using the
Power switch on the back of the drive, turn the drive OFF then ON to
return to normal operation.