User`s manual

www.apricorn.com
8
Using the Aegis Padlock DT
Entering and exiting the Standby Mode, Admin
Mode, and User Mode
Entering the Standby Mode

to other operations.


My Computer and
it does not provide either the regular functions or the encryption function. However, it




Entering the User Mode

1.
Turn the power switch to the ON position. The drive will be in Standby Mode.
2.
is 123456) and press . The UNLOCK indicator light turns GREEN indicating

need to re-enter the correct password.
Exiting the User Mode
To exit the User Mode, press the “Cancel” button on the Aegis Padlock DT keypad.

Alternately, you can turn your Aegis Padlock DT OFF at the power switch on
the back of the unit. Once you turn the Aegis Padlock DT ON again, the LOCK
indicator light will be RED, indicating that you are in the Standby Mode.