User Manual

Quick Reference Guide for

Programming Key Combinations

Standby Mode

• 7+6 = Read-Only On

• 7+9 = Read-Only Off

Cancel +1 then hold 0 = Diagnostic Mode

User Mode

• Unlock + 1 = Enter User PIN (from forced enrollment state)

• Unlock + 3 = Set Self-Destruct PIN

ADMIN Mode

• Unlock + 0 = Enter Admin Mode

• Unlock + 1 = Create User PIN

• Unlock + 2 = not used

• Unlock + 3 = Set Self Destruct PIN Admin or User setup

• Unlock+ 4 = Set Minimum PIN length

• Unlock + 5 = Set Brute Force Attempts

• Unlock + 6 = Auto Lock

• Unlock + 7 = Set Recovery PIN

• Unlock + 8 = 1X Use to Enter Recovery PIN

• Unlock + 9 = Enter / Change Admin PIN

• 7+1 = Turn Lock Override On

• 7+0 = Turn Lock Override Off

• 7+ 4 = Disable / Enable Self-Destruct PIN

• 7+6 = Read-Only On

• 7+9 = Read-Only Off

• 7+8 = Erase User and Self-Destruct PIN’s

• 0+1 = Set Forced-Enrollment for User

• 0+3 = Turn On LED Flicker When Entering PIN from Standby

• 0+4 = Turn Off LED Flicker When Entering PIN from Standby