User`s manual

15. ADVANCED TOPICS
15.1. List of advanced settings
To allow interfacing with almost every MIDI controller, whether in software or hardware, the RGC-24A-M allows
fine-grain control of its behavior via “GLOBAL PARAMETERS”:
 The MIDI channel to which the RGC responds can be set to any value (0 ...15)
 The MIDI controller numbers on which the gain controls live can be altered to any value (0...127)
 The number of MIDI controllers on each channel can be adjusted. The default of 8 controllers per channel can
be altered e.g. to 24 controllers on only one channel.
 The curve characteristics (the mapping between controller value and resistance) can be defined by the user.
Each curve is defined by 17 values, dividing the gain entire control range into 16 sections.
Slot Parameter Possible values Default value
00: General Configuration 01: MIDI channel base when
DIP-Switches 1/2 are set to
OFF/OFF
0x00 ...0x0F 0x01
(= Channels 2,3,4)
02: MIDI channel base when
DIP-Switches 1/2 are set to
OFF/ON
0x00 ... 0x0F 0x04
(= Channels 5,6,7)
03: MIDI channel base when
DIP-Switches 1/2 are set to
ON/OFF
0x00 ... 0x0F 0x07
(= Channels 8,9,10)
04: MIDI channel base when
DIP-Switches 1/2 are set to
ON/ON
0x00 ... 0x0F 0x0A
(= Channels 11,12,13)
05: MIDI controller base 0 ...127 (0x00 ... 0x7F) 0x18
(= Controllers 24...31)
06: Number of controllers per
MIDI channel
0x00 ... 0x18 0x08
01: Curve adjustment for
curve #1
00 ... 16: Curve node index 0x000 ... 0xFFF
(0 ... 4095)
02: Curve adjustment for
curve #2
00 ... 16: Curve node index 0x000 ... 0xFFF
(0 ... 4095)
03: Curve adjustment for
curve #3
00 ... 16: Curve node index 0x000 ... 0xFFF
(0 ... 4095)
04: Curve adjustment for
curve #4
00 ... 16: Curve node index 0x000 ... 0xFFF
(0 ... 4095)
Table 2: List of Global Parameters
26