Manualshelf

User`s manual

ManualsBrandsAppsys ProAudio ManualsComputer equipmentADX-32B
21222324252627282930
Use the supplied green LED to test if the controller is actually working. Insert the longer wire (anode) into
contact #1 from D-SUB connector on the RGC, and the shorter wire into any of contacts #2 to #9. The LED
should change brightness when gain values change (dark at value 0, fully lit at value 127). Hint:
The pins numbers are printed on the D-SUB jack (very small).
Pin
Function
Pin
Function
1
Common Anode
6
Cathode CH1
2
Cathode CH2
7
Cathode CH3
3
Cathode CH4
8
Cathode CH5
4
Cathode CH6
9
Cathode CH7
5
Cathode CH8
25