Specifications

ADX-32B / ADX-64B-PRO
5. IMPORTANT SETUP NOTES
6. FRONT PANEL
6.1. Cat5 Connection 1
Connection 1 for Cat5 cable (ADAT signals 1-4 and MIDI1 data)
 LEDs 1-4 show the current status of the channels 1-4.
OFF No signal
ON ADAT signal detected, valid master clock detected, „clock cleaning“ active
Blinking ADAT signal detected but no valid master clock . No transmission possible!
Please make sure that you have
• an ADAT signal coming from the clock master on ADAT1, and DIP switch 6 is set to „OUT“
or
• an external wordclock signal connected to the WORDCLOCK jack, and DIP switch 6 is set to „IN“
 Jacks “A” and “B” are electrically paralleled.
7
A B
Termination
1 (A/ B)
2 (A+B)
Cat5 Connection 1
4321
Power ADAT Clock