Specifications

User's Manual
7.3. ADAT 5-8 (ADX-64B-PRO only)
The transmission direction (TX or RX) for channels 5-8 must be set using the DIP switches 1-4
(see 6.2. ADAT 1-4).
7.4. MIDI1
The ADX can transmit MIDI in a bi-directional way. Because this feature makes use of the „User Bit“ in the ADAT
data stream, a valid ADAT signal in the same transmission direction is required. The ADX picks the first ADAT
connection which is set to „IN“ for the MIDI TX, and the first ADAT connection which is set to „OUT“ for the MIDI
RX:
 If you want to send MIDI data, at least one of the ADAT connections 1-4 must be set to „IN“ and must carry a
valid signal
 If you want to receive MIDI data, at least one of the ADAT connections 1-4 must be set to „OUT“ and must
carry a valid signal
7.5. MIDI2
Works like MIDI1, except that ADAT5 is used for data transmission.
 If you want to send MIDI data, at least one of the ADAT connections 5-8 must be set to „IN“ and must carry a
valid signal
 If you want to receive MIDI data, at least one of the ADAT connections 5-8 must be set to „OUT“ and must
carry a valid signal
10
8765
MIDI2
Cat5 Connection 1
IN OUT/THRUIN OUT/THRU IN OUT/THRU IN OUT/THRU IN OUT/THRUIN OUT/THRU
Cat5 Connection 2
OUT
CH5/WC/MIDI
OUT CH6 OUT CH7 OUT CH8
75Ω WC TERM
MULTI CH5 MODE
IN IN IN IN
OFF
WC
1 2 3 4 5 6
ON