User Guide
Table Of Contents
Robustel L2TP App User Guide
Page 9
L2TP Client
Item
Description
Default
Server Address
Enter your L2TP server’s public IP or domain name.
Null
Username
Enter the username which was provided by your L2TP server.
Null
Password
Enter the password which was provided by your L2TP server.
Null
Authentication
Select from “Auto”, “PAP”, “CHAP”, “MS-CHAP v1” and “MS-CHAP v2”.
You need to select the corresponding authentication method based on the
server’s authentication method. When you select “Auto”, router will auto
select the correct method based on server.
Disable
Tunnel Secrets
Enter L2TP tunnel secret in this item.
Null
Port
Set the Port number of the L2TP client.
Null
Enable NAT
Click to enable NAT feature of L2TP. The source IP address of host Behind
R3000 will be disguised before accessing the remote L2TP server.
Disable
All traffic via this
interface
After click to enable this feature, all data traffic will be sent via L2TP
tunnel.
Disable
Remote Subnet
Enter L2TP remote Protected subnet’s address.
Null
Remote Subnet Mask
Enter L2TPremote Protected subnet’s mask.
Null
Expert Options
You can enter some other PPP initialization strings in this field. Each string
can be separated by a space.
noccp
nobsdcomp
Go to Status to check the L2TP connection status.