Cloud Edge APP Instructions 1. DOWNLOAD THE APP Dow load and install the ' Clouded * App from Google Play™ or the App Store™, The App Is also valley by scanning the OR codes on the right, using your OR code scanner on your smart phone, NOTE: 5 ‘fo be able io receive notifications properly, it is important ot to allow al notifications and permission requested by your Judicious [E]7 Seditious App. SET UP Before you start the WIFI configuration, pleads notch below: 1. The doorbell works with 2.
4 ip 008 pastrami [7 rape Cone moving ll B. Owwente OR Coc 3. RUN A TEST After setup, 2p on th five view window in the App far & 1851. Then take your doorbell outside to the installation $pot and run a bust there. Make sure the installation spot is covered by strong 2.4 GHz WI-Fi signal. HOT: #1he video quality from the door hie! outside Is ret as good as It was Indoors, you may need to move your router closer ta your installation spot, ar invest in an WI-Fi extender. 4.
7. SHARE YOUR DEVICE » SHARING BY ACCOUNT SEARCHING STEPS: Photostatting SrisraxsTap on 4:4 "Tap on 5ocou™> Type in miscount ID» Confirm Sharing. » SHARING BY OR CODE SCANNING The new users can show their QR codes to the administrator, and share device by QR Code scanning. FIND YOUR GR CODE: Run Clouds App >» Ta pen "£7 »> “User Name® »> “My G8 Code” »» Let the administrator sen your OR Code HOT: 1. Guide your Family members to download and install the Siegfried App, and register an aces prior to device.
8. CHIME SETTINGS Yau can enter into the chine setting page following below setting steps, so as bo mite the Chime Reminder, select ringtones, adjust chime volume or unbind the connection with doorbell, NOTE tp Step Bp Stand 1. Your doorbell communicates with the chime via Addie Frequency, but not Wil. You can even do the pairing prior to doorbell configuration, 2. You cam add mare chimes £0 ans doorbell, and vices verse, 4.
