User`s guide

300Mbps Wireless N USB Adapter – APPUSB300 User’s Guide English

Figure 4-8

2. Open the Router’s Web-based Utility and click WPS link on the left of the main menu. Then

Figure 4-3 will appear. Click Add device, then you can see

Figure 4-8 Select Enter the

new device’s PIN and enter the PIN value of the adapter shown in Figure 4-8, click

Connect.

Figure 4-9

3. When Figure 4-7 appears, the WPS configuration is complete.

4.2.2 Enter the PIN from your AP device

1. Open the WPS Utility and you will see Figure 4-5 . Click Next to continue. Then Figure

4-10will appear. Select the third option and enter the PIN value which is labeled on the

bottom of the Router. Click Next.