Installation guide

5.6 Wireless Base Configuration
Please click „Wireless -> Basic Setttings‰ located at the web
management interface, the following message will be displayed on your
web browser:
You could configure the
minimum number of Wireless
settings for communication, such as
Network Name (SSID) and Channel.
The Access Point can be set simply
with only the minimum setting items.
Disable
Wireless:
Wireless On/Off
Band: Supports 11G/11G/11N mixed modes.
SSID: Main Service Set Identifier. ItÊs the "name" of your
wireless network.
Broadcast
SSID:
Select „enable‰ to enable the device's SSID to be
visible by wireless clients
Channel
Number:
This field determines which operating frequency will
be used. The default channel is set to Auto, so the
AP will choose the best channel automatically. It is
not necessary to change the wireless channel unless
you notice interference problems with another nearby
access point.
27