User`s guide
Table Of Contents
- APPPCI300_ug_ES.pdf
- Capítulo 1. Introducción
- Capítulo2. Guía de Instalación
- Capítulo 3. Guía de configuración
- 3.1 Current Status
- 3.2 Profile Management
- 3.4 Windows® Vista
- 3.5 Windows® 7
- Capítulo 4. Configuración WPS
- Apéndice A: Especificaciones
- Apéndice B: Glosario
- APPPCI300_ug_EN.pdf
- APPPCI300_ug_FR.pdf
- APPPCI300_ug_DE.pdf
- APPPCI300_ug_IT.pdf
- 2.1 Panoramica del prodotto
- 2.2 Caratteristiche
- 2.1 Installazione hardware
- 2.2 Installazione Software
- 2.2.1 Per Windows® XP
- 3.2.1 Aggiungere o modificare un profilo di configurazione
- 3.2.2 Rimuovere un profilo
- 3.2.3 Attivare un altro Profilo
- 3.2.4 Esportare un profilo
- 3.2.5 Importare un profilo
- 3.2.6 Scansione Reti Disponibili
- 3.2.7 Auto Profile Selection Management
- 3.3.1 Verifica Informazioni Driver
- 3.3.2 Verifica Informazioni Statistiche Ricevute e Trasmesse
- 2.2.1 Per Windows® XP
- 3.4 Per Windows® Vista
- 3.5 Per Windows® 7
- 4.1 Modalità di configurazione tasto (PBC)
- 4.2 Modalità PIN
- APPPCI300_ug_PT.pdf
- 1. Introdução
- 2. Guia de Instalação
- 3. Guia de Configuração
- 3.1 Current Status
- 3.2 Profile Management
- 3.4 Para Windows® Vista
- 3.5 Para Windows® 7
- 4 Configuração WPS
- Apêndice A: Especificações
- Apêndice B: Glossário
300Mbps Wireless N PCI Adapter – APPPCI300 User’s Guide English
Figure 3-4
WPA/WPA2: Wi-Fi Protected Access
WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase
802.1x: Enables 802.1x security.
Pre-Shared Key (Static WEP): Enables the use of shared keys that are defined on both
the access point and the station. To define shared encryption keys, choose the Shared Key
radio button and click Configure to fill in the Define Shared Keys window (shown in Figure
3-5).
None: No security (not recommended
Note:
,
on. To complete WEP encryption configuration, you must select the 802.11
Authentication Mode as appropriate on the Advanced tab of this Profile Management dialog.
To configure the Encryption Keys under the Pre-Shared keys (Static WEP) Security mode:
).
If the access point which the Adapter is associated has WEP set and the client has WEP enabled
make sure that Allow Association to Mixed Cells is checked on the Security tab to allow
associati
53