User`s manual

ManualsBrandsAppro ManualsHome building and DecorSD-7800

7800 Series Hysteresisgraph System User's Manual

LIMITED WARRANTY

Lake Shore Cryotronics, Inc. (henceforth Lake Shore), the manufacturer, warrants this product to be free from defects in material and

workmanship for a period of twelve months from the date of shipment. During the warranty period, under authorized return of

instruments or component parts to Lake Shore freight prepaid, the company will repair, or at its option replace, any part found to be

defective in material or workmanship, without charge to the Owner for parts, service labor or associated customary shipping cost.

Replacement or repaired parts will be warranted for only the unexpired portion of the original warranty.

All products are thoroughly tested and calibrated to published specifications prior to shipment. Calibration Certifications are offered

for six month periods only. Where such documentation must be updated, a re-certification service is offered by Lake Shore at a

reasonable cost.

LIMITATION OF WARRANTY

This warranty is limited to Lake Shore products purchased and installed in the United States, or Internationally through our approved

distribution agents. This same protection will extend to any subsequent owner during the warranty period. It does not apply to damage

resulting from improper or inadequate maintenance, unauthorized modification or misuse, operation outside of the environmental

specifications, or from buyer-supplied software interfacing. It does not apply to damage caused by accident, misuse, fire, flood or acts

of God, or from failure to properly install, operate, or maintain the product in accordance with the printed instruction provided.

This warranty is in lieu of any other warranties, expressed or implied, including merchantability or fitness for a particular purpose,

which are expressly excluded. the owner agrees that Lake Shore’s liability with respect to this product shall be set forth in this

warranty, and incidental or consequential damages are expressly excluded.

SOFTWARE LIMITATIONS

Lake Shore has worked to ensure that the 7800 Series Hysteresisgraph Software is as free of errors as possible, and that the results you

obtain from the system are accurate and reliable. However, understand that with any computer software the possibility of software

errors exists.

In any important research, as when using any laboratory equipment, results should be carefully examined and rechecked before final

conclusions are drawn. Neither Lake Shore nor anyone else involved in the creation or production of this software can pay for loss of

time, inconvenience, loss of use of the product, or property damage caused by this product or its failure to work, or any other

incidental or consequential damages. Use of our product implies that you understand the Lake Shore license agreement and statement

of limited warranty.

SOFTWARE LICENSE AGREEMENT

This software is protected by United States copyright law and international treaty provisions. Lake Shore provides this software

package and grants you (the user of the software) a non-exclusive and non-transferable right to use this software. Unless as provided

in this Agreement, any attempt to sublicense, lease, rent, assign, or transfer this license or this software is void. To maintain software

warranty, the source code must not be modified. Any changes made to the Hysteresisgraph software source code is at the user’s risk.

Lake Shore will assume no responsibility for damage or errors incurred as result of any changes made to the source code.

Under the terms of this agreement you may use the Hysteresisgraph Software on any one computer. Archival floppy disks are

permitted for the sole purpose of protecting the software from loss. Any unauthorized duplication or use of the Hysteresisgraph

Software in whole or in part, in print, or in any other storage and retrieval system is forbidden.

TRADEMARK ACKNOWLEDGMENT

Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those

designations appear in this manual and Lake Shore was aware of a trademark claim, the designations have been printed in initial

capital letters and the ™ or

symbol used.

IDEAS

is a trademark of Unisys Corporation and is licensed for use with Lake Shore software drivers.

MS-DOS, Windows, Excel, and Access are trademarks of Microsoft Corporation.

NI-488.2™ is a trademark of National Instruments.

QMSA™ is a trademark of Lake Shore Cryotronics, Inc.

reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise, without the express written permission of Lake Shore.