Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Page - 64 Revision 1.0
7. FIRMWARE UPGRADE

Firmware can be upgraded through VLPro. Follow the below instructions in the
event that a VLPro upgrade cannot be done, or has failed.
To upgrade the firmware on the 7700ACO2-HD unit follow the procedure outlined below:
1. Ensure an Ethernet cable is plugged into the rear of the unit and the frame is powered up.
2. Open a web browser and type the IP address of the card into the URL address field.
3. An upgrade page will appear as shown in Figure 7-1.
Figure 7-1: Upgrade Window
4. To load the firmware file, select the Browse button. A Choose File dialogue window will appear as
shown in Figure 7-2.