Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Revision 1.0 Page - 51
6.4.5. Fault Condition – Video 1
The Fault Condition – Video 1 tab, shown in Figure 6-9, controls which alarms are used to determine a
‘Individual Fault’ alarm on Video 1.
For brevity, only “Fault Condition – Video 1” will be explained in the manual. “Fault Condition – Video 2”
has an identical menu.
Figure 6-11: Fault Condition – Video 1 Tab
6.4.5.1. Fault Trigger – Video Input 1
The Fault Trigger – Video Input 1 sub-box selects which faults will be pooled. To select a fault, check
the checkbox beside it.