Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Page - 46 Revision 1.0
6.4.1.6. Horizontal Phase
The Horizontal Phase slider parameter sets the horizontal (by number of samples) phase offset of the
output video with respect to the path’s reference source. This control is only applicable if the line
synchronization parameter is enabled. The range of the control is dependent on the operating video
standard.
6.4.1.7. Output Video Standard
The Output Video Standard combo box sets the output standard. The Video Standard must be set
correctly in order to properly operate. If the selected and input video standards mismatch, the output video
will be distorted. Table 6-5 shows the options available:
525/59.94
625/50
1080i/59.94
720p/59.94
1080i/50
720p/50
Table 6-5: Output Video Standard Menu Options
6.4.1.8. Fault Collection Control
The Fault Collection Control combo box sets the fault collection mode for determining what puts a video
path into fault. Table 6-6 describes the options and their function:
Individual
Path will be in fault if any one of the monitored parameters
goes into fault.
Collective
Path will be in fault if the collection of faults defined in
Section 5.9 is alarmed.
Table 6-6: Fault Collection Control Menu Options