Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Page - 42 Revision 1.0
6.3.4.3. SD Size
Sets the size of the Thumbnail when the input is SD.
6.3.4.4. HD Size
Sets the size of the Thumbnail when the input is HD.
6.3.4.5. Destination Address
Sets the IP address of the Thumbnail server that will receive and process the Thumbnails.
6.3.5. SLKE Configuration (-SLKE Only)
The SLKE Configuration tab allows configuration of the on-board H.264 encoder.
Figure 6-6: SLKE Configuration Tab
Control:
6.3.5.1. SLKE Enable
Enables or disables the H.264 encoded output.
6.3.5.2. Total Bit Rate
Sets the bit rate of the encoded H.264 stream, from 1.0 to 10.0 Mbps in steps of 0.5 Mbps.