Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Revision 1.0 Page - 37
6.2. VISTALINK
®
CONFIGURATION
The module has three main configuration nodes, as shown in Figure 6-1. The main node (displayed as the
modules IP address), and the two ACO processing nodes (displayed as ACO 1/ACO 2 plus any options).
Only the menu options from the main node and ACO 1 node will be shown (ACO 2 is identical to ACO 1).
Figure 6-1: Module Nodes
6.3. MAIN MODULE NODE
6.3.1. General
The General tab, as shown in Figure 6-2, shows miscellaneous parameters of the module. These
parameters are listed below:
Card Type:
Indicates the product model number of the card (including installed
options).
Detected Genlock Standard:
Indicates the currently detected genlock reference standard.
FPGA Build Number
Indicates the FPGA build number.
Firmware Version:
Indicates the currently installed firmware version.
Creation Date:
Indicates the build date of the firmware version.
Board Name:
Indicates the product hardware version of the module.
Board Revision:
Indicates the hardware version of the module.
Board Serial Number:
Indicates the physical serial number of the module.
Board Build Number:
Indicates the physical board build of the module.