Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Page - 34 Revision 1.0
5.9.6. Audio Loss Select
AL1(1-4)/AL2(1-4)
This parameter sets whether the presence of audio groups 1-4 are used to
determine a fault condition.
ON – The parameter is used in determining a fault condition.
OFF – The parameter is not used in determining a fault condition.
ON
OFF
5.9.7. Audio Over Select
AO1(1-8)/AO2(1-8)
This parameter sets whether audio over on channel pairs 1-8 are used to
determine a fault condition
1 = Channels 1&2
2 = Channels 3&4
3 = Channels 5&6
4 = Channels 7&8
5 = Channels 9&10
6 = Channels 11&12
7 = Channels 13&14
8 = Channels 15&16
ON – The parameter is used in determining a fault condition.
OFF – The parameter is not used in determining a fault condition.
ON
OFF
5.9.8. Audio Silence Select
AS1(1-8)/AS2(1-8)
This parameter sets whether audio silence on channel pairs 1-8 are used
to determine a fault condition
1 = Channels 1&2
2 = Channels 3&4
3 = Channels 5&6
4 = Channels 7&8
5 = Channels 9&10
6 = Channels 11&12
7 = Channels 13&14
8 = Channels 15&16
ON – The parameter is used in determining a fault condition.
OFF – The parameter is not used in determining a fault condition.
ON
OFF