Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Revision 1.0 Page - 27
5.7. SWITCHER NODE MENU
LOV1
Path 1 Loss of Video Mode Sets the output mode when video is lost on Path 1.
LOV2
Path 2 Loss of Video Mode Sets the output mode when video is lost on Path 2.
GPI1
Path 1 GPI Control Enables or Disables GPI Control on Path 1.
GPI2
Path 2 GPI Control Enables or Disables GPI Control on Path 2.
LNS1
Path 1 Line Sync Enable Enables or Disables the Line Synchronizer on Path 1.
LNS2
Path 2 Line Sync Enable Enables or Disables the Line Synchronizer on Path 2.
GSRC
Module Genlock Source Controls the Genlock Source for the Module.
FCO1
Path 1 Fault Collection Sets the Fault Collection state for Path 1.
FCO2
Path 2 Fault Collection Sets the Fault Collection state for Path 2.
Table 5-8: Video Switcher Node Menu Structure
5.7.1. Loss of Video Mode
LOV1/LOV2
This parameter sets the output mode when a source with no video is
routed to the output.
BLCK – Output video will be black.
BLUE – Output video will be blue.
BLCK
BLUE