Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Page - 16 Revision 1.0
5.3. CARD-EDGE MENU STRUCTURE
The only option in the top level menu tree is CFG. Selecting this option will take you to the menu options
available on the 7700ACO2-HD. The following is a brief description of the menu tree (see Table 5-1) that
appears when you enter the card edge menu system. Selecting one of these items will take you down
into the next menu level to set the value of that parameter.
The 7700ACO2-HD has two separate operating paths, resulting in two distinct outputs. On the rear panel
the outputs are labeled ACO1 and ACO2. Throughout the manual, these will be referred to as Path 1 and
Path 2 respectively. The menu options for both Path 1 and Path 2 will be shown as combined (in the
format Path1/Path2).
Throughout the descriptions of the Menu items, default values are shown with underlined
text.
VIDN
Video Input Control
Controls Input Video Parameters.
AUDN
Audio Input Control
Controls Input Audio Parameters.
VIDP
Video Processor
Controls the Video processor.
SWIN
Switcher Node
Controls switcher properties.
P1FD
Path 1 Fault Duration
Fault duration controls for Path 1.
P2FD
Path 2 Fault Duration
Fault duration controls for Path 2.
P1AS
Path 1 Alarm Select
Sets the alarms monitored for Path 1 fault.
P2AS
Path 2 Alarm Select
Sets the alarms monitored for Path 2 fault.
DISP
Display Orientation
Sets the orientation of the card edge display.
VER
Firmware Version
Displays the firmware version number.
FRST
Factory Reset
Performs a reset to factory settings.
Table 5-1: Top Level Menu Structure

The menus will timeout (approximately 30 seconds) after a period of inaction.
After the timeout period expires, the menu will return to CFG menu.