Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Revision 1.0 Page - 11
Figure 2-8: Show All Trap Destinations
18. The basic configuration of the card is now complete. Once you have exited the sub-menus and
you have returned to the Main Menu screen, the user can save the changes by selecting <X> Exit
from the Main Menu options.
19. Once the user has exited the Main Menu, the changes will be saved and a message stating
“Changes are saved!” will be displayed.

Please note if the user selects option <W> Exit without saving to flash, the
changes made during the configuration process will be lost.
20. Once the changes have been saved, the user must power cycle the unit and remove the ribbon
cable before proceeding to VistaLINK
®
configuration.

Wait at least 30 seconds after applying the network changes before power
cycling to allow the settings to be written to memory.