Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Revision 1.0 Page - 9
Figure 2-5: Main Setup Menu
6. To configure the network settings, select option <1> Network Setup from the main menu.
7. A Network Setup screen, as shown in Figure 2-6, will appear enabling the user to enter the
appropriate network information.
8. The user must enter the IP Address, Netmask, Gateway, and Broadcast addresses for the card.
Type the corresponding number of the desired address into the command line. For example, to set
the IP Address in the Network Setup screen, select option <1> IP Address.
9. Once complete, the user will be prompted to enter the IP Address of the card. Enter the IP
address and then press the enter key.
Figure 2-6: Network Setup Menu