Installation guide

12 7800 Series Keypad Installation Guide
Press SITE to choose (Accept Site Code) — Door access
is granted when the Wiegand site code string received
matches any site code programmed at SITE CODE
ENTRY. For details refer back to the REQUIRE SITE
CODE option.
Press ANY to choose (Any Wiegand Read) — Door
access is granted when any Wiegand string is received.
Press ON to choose (Relay Always On) — The relay is
always on.
Press the COMMAND key to display the next action.
Press LAST to choose (Keep Last State) — The relay
remains in the same state and does not change when
communication is lost.
After choosing the action, the NO COMM WITH PNL
option and the newly dened action display. Press
COMMAND to save the entry. Press the Back Arrow to
return to REQUIRE SITE CODE:.
SYSTEM
AREA A/P H/A HSA
System
Congure the keypad as the same system type selected
in System Options panel programming. Select HSA when
zones are assigned to Bedrooms for the Sleep area to
be active.
DEALER LOGO
ADD DELETE
Dealer Logo
Use this option to add a custom dealer logo to the Main
Screen of the keypad. Prior to selecting ADD, insert
a micro SD card into the slot on the right side of the
keypad with the logo le. Select ADD to upload the le.
The keypad will display ADDING LOGO SURE? Select YES
to proceed. While the logo is being uploaded, the keypad
displays ADDING LOGO. ADDING LOGO COMPLETED
displays to conrm a successful upload.
Select ADD at the DEALER INFO prompt to include
information about the dealer when the logo is pressed on
the Main Screen. The keypad displays ADDING INFO SURE?
to conrm your selection. Press YES to proceed. While
the info is being uploaded, the keypad displays ADDING
INFO. ADDING INFO COMPLETED displays to conrm a
successful upload. Once dealer logo and information have
been successfully uploaded press in and release micro SD
card to eject.
Contact DMP Marketing at 1-800-641-4282 or
[e-mail] for information about acquiring
a logo.
Note: For instructions on loading a Custom Dealer Logo to
the Main Screen of the keypad prior to being connected
to the panel, see Additional Programming; Preloading
Custom Dealer Logo and Information.
CHOOSE ACTION
LAST
ADDING LOGO
SURE? NO YES
DEALER INFO
ADD DELETE
ADDING INFO
SURE? NO YES