Installation guide

7800 Series Keypad Installation Guide 11
Site Code Position
Enter the site code start position in the data string. Press
any select area to enter a number between 0-255. Press
COMMAND to save the entry. Default is 1.
Site Code Length
Enter the number of characters the site code contains.
Press any select area to enter a number between 1-16.
Press COMMAND to save the entry. Default is 8.
User Code Position
Dene the User Code start bit position. Press any select
area to enter a number between 0-255. Press COMMAND
to save the entry. Default is 9.
User Code Length
Dene the number of User Code bits. Press any select
area to enter a custom number. Custom numbers can only
be a number between 16-32. Press COMMAND to save the
entry. The default is the DMP value of 16.
REQUIRE SITE
CODE: NO YES
Require Site Code
Press YES to use a site code, for non-DMP cards, and press
CMD to view the site code entry display. Default is NO.
In addition to User Code verication, door access is only
granted when any one site code programmed at the SITE
CODES entry option matches the site code received in the
Wiegand string. You can program up to eight three-digit
site codes.
Note: A card with a site code greater than three digits
cannot be used. Use only cards with three-digit
site codes.
SITE CODES 1-4
> > > >
Site Codes 1-4
Enter site codes 1-4 (left to right separated by > sign).
Press the > sign to add, delete, or change the site code.
Press COMMAND to save the entry.
Site code range is 0-999.
SITE CODES 5-8
> > > >
Site Codes 5-8
Enter site codes 5-8 (left to right separated by > sign).
Press the > sign to add, delete, or change the site code.
Press COMMAND to save the entry.
Site code range is 0-999.
No Communication With Panel
This option denes the relay action when communication
with the panel has not occurred for ve seconds. Press
any select area to display CHOOSE ACTION.
The default is Relay Always Off.
Choose the No Communication with Panel action that
is required.
Press OFF to choose [Default] (Relay Always Off) —
The relay does not turn on when any Wiegand string is
received. Off does not affect any REX operation.
SITE CODE:
POSITION 1
SITE CODE:
LENGTH 8
USER CODE:
POSITION 9
USER CODE:
LENGTH 16
NO COMM WITH PNL
OFF
CHOOSE ACTION
OFF SITE ANY ON